312 5-4 . Using the driving support systems
● Vehicles with a Connected navigation : The connected service that SUBARU provides is subscribed to . Contact your SUBARU dealer for details .
● The vehicle is driving on a vehicleonly road , such as an expressway .
●There is a preceding vehicle and the system is able to detect it .
● No vehicle interruptions occur .
●The preceding vehicle has not been replaced .
●Clearance sonar and FCTA are not detecting the object in front of you .
●The driver monitor judges that the driver is looking forward .
●The steering wheel has not been operated .
●The brake pedal has not been operated .
Approach warning
In situations where the vehicle approaches a preceding vehicle and the system cannot provide sufficient deceleration , such as if a vehicle cuts in front of the vehicle , a warning display will flash and a buzzer will sound to alert the driver . Depress the brake pedal to ensure appropriate vehicle-to-vehicle distance .
■ Warnings may not occur when
In the following situations , the warning may not operate even though the vehicle-to-vehicle distance is short .
• When the preceding vehicle is traveling at the same speed
or faster than your vehicle
• When the preceding vehicle is traveling at an extremely low speed
• Immediately after the vehicle speed has been set
• When the accelerator pedal is depressed
Curve speed reduction function
When a curve is detected , the vehicle speed will begin being reduced . When the curve ends , the vehicle speed reduction will end .
Depending on the situation , the vehicle speed will then return to the set vehicle speed .
In situations where vehicle-to-vehicle distance control needs to operate , such as when a preceding vehicle cuts in front of your vehicle , the curve speed reduction function will be canceled .
■ Situations in which the curve speed reduction function may not operate
In situations such as the following , the curve speed reduction function