154 3-1 . Instrument cluster
●When the outside temperature is approximately 37 ° F ( 3 ° C ) or
lower , the indicator will flash
for approximately 10 seconds , then stay on .
■ Liquid crystal display �P . 156
■ Customization The gauges and meters can be customized in of the multi-information display . ( �P . 598 )
WARNING
■ The information display at low temperatures
Allow the interior of the vehicle to
warm up before using the liquid crystal information display . At
extremely low temperatures , the information display monitor may respond slowly , and display
changes may be delayed .
For example , there is a lag between the driver ’ s shifting and the regenerative braking power
appearing on the display . This lag could cause the driver to downshift again , causing rapid and
excessive regenerative braking and possibly an accident resulting in death or injury .
Switching the meter display
Odometer and trip meter display
■ Display items
• Odometer
Displays the total distance the vehicle has been driven .
• Trip meter A / Trip meter B
Displays the distance the vehicle has been driven since the meter was last reset . Trip meters A and B can be used to record and display different distances independently .
■ Switching the display
The display switches each time the switch is pressed . Also , when the switch is continuously pressed during the trip meter display , the driving distance can be changed to “ 0 ”.
The Multi-Information display can be switched between display and hidden .