2-2 . Charging
141
Likely cause
AC charging connector is not securely connected
Latch release button of AC charging connector was pressed while AC charging
Correction procedure
Check the connection status of the AC charging connector .
• When connecting the AC charging connector , make sure not to touch the latch release button . Insert the AC charging connector securely until you hear a click . The AC charging connector may not be connected correctly if the latch release button is pressed while inserting .
• After connecting the AC charging connector , check that the latch release button is not pressed and the charging indicator of the charging port is turned on .
If charging cannot be carried out , even though the proper procedures were followed , have the vehicle inspected by your SUBARU dealer .
When the latch release button is pressed while AC charging , charging stops . To continue charging , reconnect the AC charging connector .
2
Electric Vehicle system
* : Electricity is consumed when operating battery heater ( �P . 98 ), the Remote Air Conditioning System ( �P . 439 ).
■ If “ Charging Complete Limited Charge Due to Battery Temp ” is shown
Likely cause
Charging was stopped to protect the traction battery as it continued to remain hot for a certain period of time .
Correction procedure
Allow the traction battery to cool down and perform charging again if the charging amount has not reached the desired amount .