8-2 . Panoramic view monitor
• There is an obstacle in front of the camera
• The tires were replaced
• The back door is open and the camera is not in the correct position
• The road surface is slippery or the wheels slip
• The vehicle is on a hill or other steep roads
● As vision that was captured in the past is being displayed , the screen and the actual situation may differ in the following cases :
• An obstacle appears or moves after vision is captured
• Sand or snow crumbles and moves after vision is captured
• Mud or puddles are in the display range
• When the vehicle slips
● Part or all of the transparent underfloor vision may appear black in the following cases :
• The vehicle starts moving with no captured vision
• The steering wheel is turned more than a certain angle
• The vehicle stops and a certain amount of time passes
WARNING
● The tire and vehicle guide lines may not align correctly with the actual vehicle position due to the number of passengers , vehicle load , road gradient , road surface conditions , brightness of the surroundings , optional equipment , tire replacements , and other reasons . Always make sure to check your surroundings while you are driving .
● Displayed vision is vision that was captured in the past . Therefore , if obstacles and other objects move after being captured , the transparent underfloor vision and the actual situation may not always match .
Related Links Changing the panoramic view monitor settings ( P . 275 )
272