42 2 . Charging operation
Using My Room Mode
I
When the charging cable is connected to the vehicle , electrical components such as the air conditioning system and audio system can be used by the power supply from an external power source .
Starting My Room Mode
1 Connect the charge cable to the vehicle to start charging .
2 Turn the power switch to ON while charging .
My Room Mode settings is automatically displayed on the multi-information display .
3 Operate the meter control switches to select “ Yes ”, and then press “ OK ”.
My Room Mode is started and it is possible to use the air conditioning system , audio system , etc .
Select “ No ” and press “ OK ” when My Room Mode is not being used . To disable My Room Mode , turn the power switch off . My Room Mode will automatically be off when DC charging is completed .
■ When using My Room Mode the following may occur
●When the remaining charge of the traction battery drops to the lower limit , the air conditioning system automatically stops . In that case , the air conditioning system can not operate until the remaining charge of the traction battery increases . Turn off the power switch once , then use My Room Mode after the remaining charge of the traction battery increases .
●The charging time of the traction battery gets longer .
●Noise may be heard from the radio depending on conditions of the radio wave .
●The surrounding area of the onboard traction battery charger in the motor compartment may become hot .
●The electric power steering system warning light ( yellow ) may turn on , but this is not a malfunction .