32 2 . Charging operation
■ Setting “ Charge Now ” to on
The “ Charge Now ” setting can be changed by performing one of the two following procedures .
� Operation on “ Charging Schedule ” screen
1 Perform step 1 to 4 of the “ Registering the charging schedule ” procedure and display “ Charging Schedule ” screen .
2 Press A or V of the meter control switches to select “ Charge Now ”, and then press OK .
Each time OK is pressed , “ Charge Now ” switches between on and off .
� Operation on “ Closing Display ” screen *
*: If “ Closing Display ” is not set to “ Charging Schedule ” on the screen of the multi-information display , the “ Closing Display ” is not displayed . In this case , check the settings on the multi-information display .
1 Turn the power switch off . The “ Closing Display ” screen is displayed on the multi-information display . ( If the door is opened while waiting for charging schedule , the same screen will be displayed .)
2 Press OK to set “ Charge Now ” to on . After setting operations are complete , charging starts when the AC charging connector is connected .
■ Displaying “ Next Event ”
1 Perform step 1 to 4 of the “ Registering the charging schedule ” procedure and display “ Charging Schedule ” screen .
2 Press A or V of the meter control switches to select “ Next Event ”, and then press OK .
The “ Next Event ” screen will be displayed .
0