2 . Charging operation 29
6 |
Press A or V of the meter control switches to select “+ add ”, and then press OK .
The “ Charging Mode ” screen will be displayed .
|
= add
Scheduled Events
-- A
V Push DJa to Add
Event
|
2 |
7
8
9
Press A or V of the meter control switches to select the item to change with the cursor , and then press or to change the
< > setting . When the charging mode is “ Start ”, set the charging start time . When the charging mode is “ Start-Stop ”, set the charging start time and stop time . After changing the settings to the desired settings , press OK .
Press A or V of the meter control switches to select the desired day to activate for the repeated setting , and then press
OK . Each time OK is pressed , the repeated setting switches between on and off . When set to on , the charging schedule is repeated on that day . It is possible to set more than one day to on . After changing the settings to the desired settings , select “ Done ”, and then press OK . A screen where the settings can be saved will be displayed .
Select “ Save ” and press OK to save the settings . The settings will be saved . If you wish to change the settings , press and perform the setting procedure again . After setting operations are complete , when the AC charging connector is connected to the vehicle , charging will be carried out according to the charging schedule settings .
Charging operation