2 . Charging operation 27
Using the charging schedule function
I
Settings of the charging schedule function
When registering the charging schedule , the following settings can be changed .
■ Select the charging mode One of the two following charging modes can be selected .
� “ Start ”
Starts charging at the set time * and finishes charging when fully charged .
� “ Start-Stop ”
AC charging is performed according to the set start time and stop time .*
*: There might be a slight error in the timing when charging starts due to the state of the traction battery .
■ Repeated setting
The periodic charging schedule can be set by selecting your desired day of the week . Select one or more day of the week to do the charging schedule .
■ Turning “ Charge Now ” on and off
To start charging without changing the charging schedule setting , turn “ Charge Now ” on to temporarily cancel the charging schedule and enable charging after connecting the AC charging connector .*
*: If the charging connector is removed during charging while the charging schedule is registered and “ Charge Now ” is on , “ Charge Now ” turns off .
■ “ Next Event ” Of the registered charging schedules , the closest charging schedule after the current time is called the “ Next Event ”. For charging schedule , AC charging will be performed according to the Next Event .
2
Charging operation