2 . Charging operation
23
3
4
5
Insert DC charging connector firmly and fully into the charging inlet .
Insert the DC charging connector and it will lock automatically .
The DC charging connector shape and treatment will differ depending on the type of DC charger . Perform the operations in accordance to handling procedures of the DC charger .
Operate the DC charger and start the charging . Follow the handling procedures of the DC charger to start charging . Charging starts after a system check is done . Confirm that the charging indicator on the charging port lights up . When the charging indicator is not lit , charging has not started .
Stop the charging in accordance to the handling procedures of the DC charger when it is desired to interrupt the DC charging .
2
Charging operation
■ During DC charging
●The current charging condition can be checked on the multi-information display .
●The actual charging time may differ from that displayed on the DC charger during charging .
●There may be occasions the radio cannot be heard due to noise occurrence during DC charging
●As the battery approaches full charge , the charging speed will decrease and it will take longer to complete charging .
●The time to complete charging may change , or charging may stop before reaching the upper limit of the charge capacity , due to the remaining charge of the traction battery , the outside temperature , the specifications of the charger ( stand ), etc .
●It is recommended to avoid frequent DC charging to prevent a decline in the traction battery capacity .
●Quickly move from the DC charging space for other users after the DC charging is completed .