1-2 . Child safety
53 remove the head restraint . ( �P . 190 ) in lock mode . In lock mode , the belt cannot be extended .
1
3 Place the child restraint system on the seat facing the front of the vehicle .
6 While pushing the child restraint system into the rear seat , allow the shoulder belt to retract until the child restraint system is securely in place .
After the shoulder belt has retracted to a point where there is no slack in the belt , pull the belt to check that it cannot be extended .
For safety and security
4 Run the seat belt through the child restraint system and insert the plate into the buckle . Make sure that the belt is not twisted .
5 Fully extend the shoulder belt and allow it to retract to put it
7 If the child restraint has a top tether strap , follow the child restraint manufacturer ’ s operation manual regarding the installation , using the top tether strap to latch onto the top tether strap anchor . ( �P . 58 )
8 After installing the child restraint system , rock it back