544 8-2 . Steps to take in an emergency
4 Press the power switch shortly and firmly .
In the event that the EV system still cannot be started , contact your SUBARU dealer .
■ Stopping the EV system Shift the shift position to P , set the parking brake and press the power switch as you normally do when stopping the EV system .
■ Replacing the key battery As the above procedure is a temporary measure , it is recommended that the electronic key battery be
replaced immediately when the battery is depleted . ( �P . 500 )
■ Alarm
If a door is unlocked using the mechanical key when the alarm system is set , the alarm may be triggered . ( �P . 67 )
■ Changing power switch modes Release the brake pedal and press the power switch in step 3 above . The EV system does not start and modes will be changed each time the switch is pressed . ( �P . 234 )
If the 12-volt battery is discharged
The following procedures may be used to start the EV system if the vehicle ’ s 12- volt battery is discharged . You can also call your SUB- ARU dealer or a qualified repair shop .
Restarting the EV system
If you have a set of jumper ( or booster ) cables and a second vehicle with a 12-volt battery , you can jump start your vehicle by following the steps below . 1 Confirm that the electronic key is being carried .
When connecting the jumper ( or booster ) cables , depending on the situation , the alarm may activate
and the doors locked . ( �P . 68 )
2 Open the hood ( �P . 464 ).
3 Open the positive (+) battery terminal cover .
While pressing on the claw , open the cover as shown in the illustra-