392 5-4 . Using the driving support systems
upward incline ) ●The vehicle is stopped
●The accelerator pedal is not depressed
●The parking brake is not engaged ●Power switch is turned to ON
■ Automatic system cancelation of hill-start assist control
The hill-start assist control will turn off in any of the following situations :
●The shift position is shifted to P or N
●The accelerator pedal is depressed
●The brake pedal is depressed and the parking brake is engaged
●A maximum of 2 seconds have elapsed after the brake pedal is released
●Power switch is turned to OFF
■ Sounds and vibrations caused by the ABS , brake assist , VSC ,
Trailer Sway Control , TRAC and hill-start assist control systems
●A sound may be heard from the motor compartment when the brake pedal is depressed repeatedly , when the EV system is started or just after the vehicle begins to move . This sound does
not indicate that a malfunction has occurred in any of these systems .
●Any of the following conditions may occur when the above systems are operating . None of these
indicates that a malfunction has occurred .
• Vibrations may be felt through the
vehicle body and steering .
• A motor sound may be heard also after the vehicle comes to a stop .
■ ECB operating sound
ECB operating sound may be heard in the following cases , but it does not indicate that a malfunction has occurred .
●Operating sound heard from the motor compartment when the brake pedal is operated .
●Operating sound heard from the motor compartment when one or two minutes passed after the stop of the EV system .
■ Active Cornering Assist operation sounds and vibrations
When the Active Cornering Assist is operated , operation sounds and
vibrations may be generated from the brake system , but this is not a malfunction .
■ EPS operation sound
When the steering wheel is operated , a motor sound ( whirring
sound ) may be heard . This does not indicate a malfunction .
■ Automatic reactivation of TRAC , Trailer Sway Control and VSC systems
After turning the TRAC , Trailer
Sway Control and VSC systems off , the systems will be automatically reenabled in the following situations :
●When the power switch is turned off
●If only the TRAC system is turned off , the TRAC will turn on when
vehicle speed increases . If both the TRAC and VSC systems are turned off , automatic reenabling will not occur when vehicle speed increases
■ Operating conditions of Active Cornering Assist
The system operates when the following occurs .
● TRAC / VSC can operate
●The driver is attempting to accelerate while turning
●The system detects that the vehicle is drifting to the outer side
●The brake pedal is released