5-4 . Using the driving support systems
387 the meter . In addition , the VSC OFF indicator and PCS warning light will be turned on in the meter .
■ When “ X-MODE ” is not available
In the following cases , the system does not operate .
• When the EV system is not started
• When SNOW / DIRT mode or D . SNOW / MUD mode is not
selected
• When “ S PEDAL DRIVE ” is selected
• When Advanced Park is being used ( If equipped )
• When the EV system is malfunctioning
■ About Dynamic Radar Cruise Control or Cruise Control
Dynamic radar cruise control and cruise control cannot be used during “ X-MODE ”. If dynamic radar cruise
control or cruise control are being used , it will be automatically canceled .
■ During “ X-MODE ”
• In “ X-MODE ”, VSC does not switch ON / OFF even if the VSC
OFF switch is operated . It is fixed as ON in SNOW / DIRT mode and OFF in D . SNOW / MUD mode .
• During “ X-MODE ”, even if the drive mode select switch , or “ S
PEDAL DRIVE ” switch is operated , operations will not switch to the respective modes .
■ “ X-MODE ” Automatic Release
• “ X-MODE ” is automatically canceled when the power switch is turned OFF .
• When the vehicle speed exceeds about 25 mph ( 40 km / h ), the “ X- MODE ” is canceled , the “ X- MODE ” indicator on the meter lights up in white , and switches to the normal mode .
• When the vehicle speed is approximately 22 mph ( 35 km / h ) or less , “ X-MODE ” indicator lights up in green and switches to “ X- MODE ” again .
■ Cautions regarding the use of the system
For safety , the following operations are not accepted when “ X-MODE ” is
ON .
• Drive mode select switch Operation
• “ S PEDAL DRIVE ” operations
When selecting “ X- MODE ”, Downhill Assist Control
When the “ X-MODE ” switch is pressed and SNOW / DIRT mode or D . SNOW / MUD mode is selected , the Downhill Assist Control automatically enters the standby state and operates under the following conditions .
• When the vehicle speed is approximately 18 mph ( 30 km / h ) or less
• Neither the accelerator pedal or brake pedal are not operated
■ When changing the target vehicle speed
When changing the target vehicle speed , adjust it with the accelerator pedal or the brake pedal . When the foot is removed from the pedal , the system will operate at the vehicle speed at that time .
5
Driving