5-4 . Using the driving support systems
371
■ When parking in a parking space registered to the memory function
1 Stop the vehicle with it aligned near the center of the target parking space .
Approximately 3.3 ft . ( 1 m )
2 Press the Advanced Park main switch and check that a possible parking space is displayed on the multimedia display .
If the “ MODE ” button is displayed , the button can be touched to change between the memory function , perpendicular parking ( forward / reverse ) function and parallel parking function .
3 Select the desired parking space , and then select “ Start ” button .
Perform the procedure for the perpendicular parking ( forward / reverse ) function from step 3 .
( �P . 358 )
■ If you feel that the vehicle is approaching close to a surrounding vehicle , object , person , or gutter
Depress the brake pedal to stop the vehicle and then change the shift
position to change the direction of travel of the vehicle . At this time , assist will be suspended . However , if the “ Start ” button is selected , assist will resume and the vehicle will move in the
direction corresponding to the selected shift position .
■ When overwriting a registered parking space
If the maximum number of parking spaces have been registered and
is selected , a registered parking
space can be selected and then overwritten with a new parking space .
5
Driving
■ When multiple parking spaces are registered
Select the desired parking space , and then select “ Start ” button .