308 5-4 . Using the driving support systems
• When a vehicle enters a detection area traveling at about the same speed as your vehicle
• As your vehicle starts from a stop , a vehicle remains in the detection area
• When driving up and down consecutive steep inclines , such as hills , dips in the road , etc .
• When driving on roads with sharp bends , consecutive curves , or uneven surfaces
• When vehicle lanes are wide , or when driving on the edge of a lane , and the vehicle in an adjacent lane is far away from your vehicle
• When an accessory ( such as a
bicycle carrier ) is installed to the rear of the vehicle
• When there is a significant difference in height between your vehicle and the vehicle that enters the detection area
• Immediately after the Blind Spot Monitor is turned on
• When towing with the vehicle
●Instances of the Blind Spot Monitor unnecessarily detecting a vehicle and / or object may increase in the following situations :
• When the sensor is misaligned
due to a strong impact to the sensor or its surrounding area
• When the distance between your
vehicle and a guardrail , wall , etc ., that enters the detection area is short
• When driving up and down consecutive steep inclines , such as hills , dips in the road , etc .
• When vehicle lanes are narrow , or when driving on the edge of a lane , and a vehicle traveling in a lane other than the adjacent lanes enters the detection area
• When driving on roads with sharp bends , consecutive curves , or uneven surfaces
• When the tires are slipping or spinning
• When the distance between your
vehicle and a following vehicle is short
• When an accessory ( such as a bicycle carrier ) is installed to the rear of the vehicle
• When towing with the vehicle