300 5-4 . Using the driving support systems
Adjusting the set vehicle speed
Canceling / resuming control
■ Adjusting the set vehicle speed using the switches
To change the set vehicle speed , press the “+” or “ -” switch until the desired speed is displayed .
1 Increase set vehicle speed 2 Decrease set vehicle speed
The set vehicle speed will increase or decrease as follows :
Short press adjustment : By 1 mph ( 1.6 km / h ) or 1 km / h ( 0.6 mph ) each time the switch is pressed
Long press adjustment : Increases continuously while the switch is pressed and held
■ Increasing the set vehicle speed using the accelerator pedal
1 Depress the accelerator pedal to accelerate the vehicle to the desired vehicle speed .
2 Press the “+” switch .
1 Press the cancel switch or driving assist switch to cancel control .
Control will also be canceled if the brake pedal is depressed .
2 Press the “ RES ” switch to resume control .
■ Automatic cancelation of the cruise control
In the following situations , the cruise control will be canceled automatically :
●When the vehicle speed drops approximately 10 mph ( 16 km / h ) or more below the set vehicle speed
●When the vehicle speed drops below approximately 20 mph ( 30
km / h )
●When the brake control or output restriction control of a driving support system operates ( For example : PCS , drive-start control )
●When the parking brake has been operated
●Situations in which some or all of the functions of the system cannot operate : �P . 266