180 4-2 . Opening , closing and locking the doors
NOTICE
■ To prevent damage to the power back door
●Make sure that there is no ice
between the back door and frame that would prevent movement of the back door . Operating the power back door when excessive load is present on the back door may cause a malfunction .
●Do not apply excessive force to the back door while the power
back door is operating .
●Take care not to damage the sensors ( installed on the right and left edges of the power back door ) with a knife or other sharp object . If the sensor is disconnected , the power back door will not close automatically .
■ Close & lock function
When closing the power back door using the close & lock function , a different buzzer than the normal one will sound before the operation begins .
To check that the operation has started correctly , check that a different buzzer than the normal one has sounded .
Additionally , when the power back door is fully closed and locked ,
operation signals will indicate that all of the doors have been locked .
Before leaving the vehicle , make sure that the operation signals have operated and that all of the
doors are locked .
Changing settings of the power back door system ( vehicles with power back door )
The settings of the power back door system can be changed by displaying the “ Vehicle Settings ” screen from the setting screen of the multi-information display . ( �P . 156 )
The changed power back door settings are not reset by turning the power switch to OFF . In order to restore the original settings , they need to be changed back on the setting screen of the multi-information display .
Adjusting the open position of the back door ( vehicles with power back door )
The open position of the power back door can be adjusted . 1 Stop the back door in the desirable position . ( �P . 173 )
2 Press and hold the power back door switch on the back door for approximately 2 seconds .
When the settings are completed , the buzzer sounds 4 times .
When opening the back door the next time , the back door will stop at