2-2 . Charging
139
■ If “ Charging Stopped Due to Pulled Charging Connector ” is shown
Likely cause Correction procedure
AC charging connector is removed while AC charging
After the traction battery is fully charged , the AC charging connector is removed while the traction battery is being recharged again because
electricity-consuming functions * have been used and the remaining charge is now reduced .
AC charging connector is not securely connected
When the AC charging connector is removed while AC charging , charging stops . If you want to fully charge the traction battery , reconnect the AC charging connector .
Check the connection status of the AC charging connector .
• When connecting the AC charging connector , make sure not to touch the latch release button . Insert the AC charging connector securely until you hear a click . The AC charging connector may not be connected correctly if the latch release button is pressed while inserting .
• After connecting the AC charging connector , check that the latch release button is not pressed and the charging indicator of the charging port is turned on .
If charging cannot be carried out , even though the proper procedures were followed , have the vehicle inspected by your SUBARU dealer .
2
Electric Vehicle system
Latch release button of AC charging connector was pressed while AC charging
When the latch release button is pressed while AC charging , charging stops . To continue charging , reconnect the AC charging connector .
* : Electricity is consumed when operating battery heater ( �P . 97 ), the Remote Air Conditioning System ( �P . 413 ).