2-2 . Charging
133
■ Charging indicator of the charging port flashes and charging cannot be carried out .
Likely cause
When charging indicator of the
charging port flashes normally * : Charging schedule is registered
When charging indicator of the
charging port rapidly flashes * : Malfunction occurred in an external power source or the vehicle
* : Refer to P . 84 for details regarding charging indicator of the charging port illumination and flashing .
■ DC charging does not start
Correction procedure
When you wish to charge according to the charging schedule , wait until the set time .
To start charging , set “ Charge Now ” to on . ( �P . 122 , 126 )
A message will be displayed on the multi-information display when the power switch is off . Follow the instructions displayed on the multiinformation display .
When DC charging cannot be performed normally
2
Electric Vehicle system
Likely cause
The DC charging connector is not properly connected to the vehicle .
The DC charging connector is not securely locked .
Correction procedure
Check the connection status of the DC charging connector and be sure that it is locked .
If the DC charging does not start , even though the DC charging connector is securely connected , there may be a malfunction with the DC charger or charging system .
• If there is a malfunction with the DC charger , contact the charging station manager .
• If there is not a malfunction with the DC charger , there may be a malfunction in the system . Contact your SUBARU dealer .