2-2 . Charging
127
Next event will be displayed according to the charging schedule settings .
Using My Room Mode
When the charging cable is connected to the vehicle , electrical components such as the air conditioning system and audio system can be used by the power supply from an external power source .
2
When press “ OK ”, close Next charging event screen .
When press “ Charge now ”, charge now is turned on .
■ When all charging schedules are turned off
The icon is not displayed on the “ Charging schedule ” screen .
The icon will be displayed by turning it ON on the “ Events ” screen .
■ When charging schedule setting operations are canceled
When the vehicle is in the following conditions , charging schedule setting operations are canceled .
●The power switch is turned off before the settings are confirmed
●The vehicle starts off
●A display with a higher priority than that of the charging schedule setting is shown
NOTICE
■ While performing the setting operation
When performing the setting operation while the EV system is
stopped , be careful that the 12-volt battery will not be discharged .
Starting My Room Mode
1 Connect the charge cable to the vehicle to start charging .
AC Charging : �P . 103 DC Charging : �P . 111 2 Turn the power switch to ON while charging .
My Room Mode settings is automatically displayed on the multiinformation display .
3 Operate the meter control switches to select “ Yes ”, and then press “ OK ”.
My Room Mode is started and it is possible to use the air conditioning
system , audio system , etc .
Select “ No ” and press “ OK ” when My Room Mode is not being used .
To disable My Room Mode , turn the power switch off .
My Room Mode will automatically be off when DC charging is completed .
Electric Vehicle system