122 2-2 . Charging
■ Setting “ Charge Now ” to on
The “ Charge Now ” setting can be changed by performing one of the two following procedures .
� Operation on “ Charging Schedule ” screen
1 Perform step 1 to 4 of the “ Registering the charging schedule ” procedure ( �P . 119 ) and display “ Charging Schedule ” screen .
2 Press or of the meter control switches to select “ Charge Now ”, and then
press .
Each time is pressed , “ Charge Now ” switches between on and off .
� Operation on “ Closing Display ” screen *
* : If “ Closing Display ” is not set to
“ Charging Schedule ” on the screen of the multi-information display , the “ Closing Display ” is not displayed . In this case , check the settings on the multi-information display .
1 Turn the power switch off . The “ Closing Display ” screen is displayed on the multiinformation display . ( If the door is opened while waiting for charging schedule , the same screen will be displayed .)
2 Press to set “ Charge Now ” to on .
After setting operations are complete , charging starts when the AC charging connector is connected .
■ Displaying “ Next Event ”
1 Perform step 1 to 4 of the “ Registering the charging schedule ” procedure ( �P . 119 ) and display “ Charging Schedule ” screen .
2 Press or of the meter control switches to select “ Next Event ”, and then press
.
The “ Next Event ” screen will be displayed .
■ When charging schedule setting operations are canceled
When the vehicle is in the following conditions , charging schedule setting operations are canceled .
●The power switch is operated before the settings are confirmed
●The vehicle starts off
●A display with a higher priority
than that of the charging schedule setting is shown
NOTICE
■ While performing the setting operation
When performing the setting operation while the EV system is stopped , be careful that the 12-volt battery will not be discharged .