118 2-2 . Charging schedule , connect the AC charging connector
The charging start time is determined based on the charging schedule at the time that the AC charging connector was connected .
● Connect the AC charging connector before the start time
When the charging mode is set to “ Start ”, if you connect the AC charging connector after the set start time , the next charging schedule will be referenced .
When the charging mode is “ Start- Stop ”, if you connect the AC charging connector after the start time , charging will start immediately and charging will be performed until the stop time .
●After connecting the AC charging connector , check that the charging indicator of the charging port flashes ( �P . 84 )
●Do not use an outlet that has a
power cut off function ( including a timer function )
Use an outlet that constantly supplies electricity . For outlets where the power is cut off due to a timer function , etc ., charging may not be carried out according to plan if the power is cut off during the set time .
■ When the AC charging connector remains connected to the vehicle
●When the charging mode is set to “ Start ”, even if multiple consecutive charging schedules are registered , the next charge will not be carried out according to the charging schedule until the AC charging connector is removed and reconnected after charging
completes . Also , when the traction battery is fully charged , charging according to the charging schedule will not be carried out .
●If the charging stop time is reached before the traction battery is fully charged and the charging mode is set to “ Start- Stop ”, the nearest charging schedule after the stop time is updated as the next charging
schedule , and charging is repeated until the battery is fully charged .
■ Smartphone-linked operation
After applying to SUBARU Solterra Connect Mobile App , it is possible to
use the smartphone application to change charging schedule settings .
■ When charging schedules are ignored
When the following operations are performed while the charging
schedule is on standby , charging schedule is temporarily canceled and charging is started .
● When the Remote Air Conditioning System ( �P . 413 ) is operated
●When turning “ My Room Mode ” on ( �P . 127 )
●When turning “ Charge Now ” on ( �P . 122 , 126 )
● When an operation that temporarily cancel charging using the
charging schedule ( �P . 105 )
■ Battery heater ( �P . 97 )/“ Battery Cooler ” ( �P . 97 )
Depending on the temperature of the traction battery , the traction battery heater or traction battery cooler
may be activated and the charging indicator may light up while the timer is waiting for charging .
Setting operations on multi-information display
When operating charging schedule , use the meter control switches .