SEAT, SEATBELT AND SRS AIRBAGS 45
However, the memory position can still be retrieved by pressing the“” button on the access key fob. For information about how to enable / disable the keyless access function, refer to“ Disabling Keyless Access Function” FP126.
. If a new position is registered for the same access key fob, the previously registered memory position data will be deleted.
. If you are carrying 2 or more access keys, seat position retrieval may not be possible.
. If, while carrying an access key, 45 seconds passed after you enter the operating range of the keyless access function, it may not be possible to retrieve the registered memory position even if the door is open. For the operating range of the keyless access function, refer to“ Locking and Unlocking with“ Keyless Access” Entry Function” FP120.
Clearing the registered seat position with access key fob s01aa0307
1. Close the driver’ s door.
2. Hold the access key fob and press and hold the“ SET” button, then press the“” button on the access key fob.
A chirp will sound, and the registered seat position and outside mirror angle on the passenger’ s side will be cleared.
NOTE
After deleting the seat position, wait for a few moments before registering a new seat position.
HEAD RESTRAINT ADJUST- MENT s01aa04
WARNING
. Never drive the vehicle with the head restraints removed because they are designed to reduce the
risk of serious neck injury in the event that the vehicle is struck from the rear. Also, never install the head restraints backwards. Doing so will prevent the head restraints from functioning as intended. Therefore, when the head restraints are removed, all head restraints must be reinstalled properly to protect vehicle occupants.
. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’ s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
. The front seat head restraints are designed to be installed into the front seats only. The rear seat head restraints are designed to be installed into the rear seats only. Do not attempt to install the front seat head restraints into the rear seats, or the rear seat head restraints into the front seats.
Both the driver’ s seat and front passenger’ s seat are equipped with head restraints. Both head restraints are adjustable in the following ways.
1
– CONTINUED –