440 IN CASE OF EMERGENCY
NOTE
. Make sure that the jack is well lubricated before using it.
. To take out the tools and spare tire, remove the multi-use cargo cover to open the under-floor storage compartment. Refer to“ Maintenance Tools” FP438.
6. Take out the under-floor storage compartment and turn the attaching bolt counterclockwise, then take the spare tire out.
8. Place the jack under the side sill at the front or rear jack-up point closest to the flat tire.
S _ 901426-W
9. Turn the jackscrew by hand until the jack head engages firmly into the jackup point.
S _ 901429-W
NOTE
Carefully read“ Temporary Spare Tire” FP436 and strictly follow the instructions.
7. Loosen the wheel nuts using the wheel nut wrench but do not remove the nuts.
S _ 901431-W
10. Insert the jack handle into the hole of the wheel nut wrench.
S _ 901430-MW S _ B02531-W