386
STARTING AND OPERATING
temporarily in the following cases and the RAB OFF indicator will illuminate.
– Ice, snow or mud is adhered to the sonar sensors or the rear bumper
near the sonar sensors. – Objects are too close to the rear
bumper when the select lever is set
to the“ R” position. – The system detects sounds of a
similar frequency to the RAB sonar. – The Vehicle Dynamics Control
OFF mode is selected. – The electric power steering system
is in the overheating prevention status because the steering wheel has been operated while the vehicle is at a standstill or driving at an extremely slow speed.
CANCELING THE REVERSE AUTOMATIC BRAKING( RAB) SYSTEM OPERATION s07bn04
The Reverse Automatic Braking( RAB) system can be temporarily canceled by any of the following operations.
. While the vehicle is stopped by the operation of automatic braking, the brake pedal is depressed.
. While the vehicle is stopped by the operation of automatic braking, the accelerator pedal is depressed.
. The accelerator pedal is depressed continuously( In this case, limited acceleration will be canceled and the vehicle will continue reversing.)
. The select lever is shifted to a position other than the“ R” position.
NOTE
The system will be canceled if the object is no longer detected.
REVERSE AUTOMATIC BRAK- ING( RAB) SYSTEM ON / OFF SETTING s07bn05
While the select lever is shifted to the“ R” position, the below functions of the Reverse Automatic Braking( RAB) system can be set by operating the center information display.
S _ 703598-W
ON setting key of Automatic Braking function
OFF setting key of Automatic Braking function
ON setting key of the Proximity Warning Detection function
OFF setting key of the Proximity Warning Detection function
When the ON setting key is shown, the corresponding setting is ON.
Touch the ON setting key to turn the setting OFF.
When the OFF setting is shown, the corresponding setting is OFF.
Touch the OFF setting key to turn the setting ON.
When the Automatic Braking function or the Proximity Warning Detection function is turned OFF, the following indicator( s) will illuminate.