INTERIOR EQUIPMENT 289
during charging, the mobile device’ s protective function may cancel charging.
. The fan may activate when the temperature rises, but this is not a malfunction.
. Qi standard wireless charger can be used on compatible devices. However, not all Qi standard devices and compatibility are guaranteed.
. If you hear noise on the AM radio while your device is charging, you may be able to reduce the noise by changing the charging frequency. To change the charging frequency, press and hold the power switch to turn on the system. After a certain amount of time, the indicator light will flash orange twice to indicate when the frequency changes.
. If the access key fob cannot be detected in the cabin, the battery cannot be charged. In addition, charging may be temporarily suspended when the remote keyless entry system is in operation, such as when opening and closing doors.
. In the following cases, the wireless charger will not operate normally:
– You are in an area near a facility where electronic equipment is emitting strong radio waves, such as a power plant, broadcast station, or TV tower, or an electronic remote controller is being used
nearby. – The ambient temperature around
the charging tray is high due to hot weather.
. If charging stops after a certain period of time, and the wireless charger does not operate normally, it may be due to any of the following reasons:
– The mobile device is protruding
from the charging area. – The mobile device is equipped with
a large protruding camera. – A thick object such as a case,
cover, or accessory is between the charging surface of the portable
device and the charging area. – Two or more mobile devices are
placed on the charging tray at the same time.
MOBILE DEVICE HOLDER s06bh03
S _ 602959-W
The mobile device holder is an accessory designed to securely hold smartphones and other devices placed on the wireless charger.
Attach the mobile device holder to the wireless charger by following these steps.
1. Install the mobile device holder on the wireless charger so that the wider side of the holder faces toward the front of the vehicle.
2. Lift the front part of the mobile device holder slightly and insert the tabs into the notches of the wireless charger.
S _ 602958-W
6
– CONTINUED –