CLIMATE CONTROL 261
directs the airflow to all vehicle occupants. To cancel the airflow“ ALL” mode, press the“” button, and“ DRIVER” or“ FRONT” will be illuminated on the climate control panel depending on which passenger’ s seats are occupied, and airflow will be directed to the seats depending on the airflow mode.
NOTE
. Depending on the settings of the climate control system or other factors affecting the temperature inside the vehicle, the operation of the Dynamic Ventilation mode for occupants may differ from the operation indicated on the climate control panel.
. The climate control system judges that the front passenger’ s seat is occupied by detecting such things as the fastening of the seatbelt, opening or closing of the door, and operation of the passenger’ s side temperature setting controls.
. If“ FRONT” is illuminated on the climate control panel when the front passenger’ s door is opened and then closed and the climate control system subsequently judges that the front passenger’ s seat is not occupied, the climate control panel will illuminate“ DRIVER” when the vehicle speed reaches approximately 13 mph( 20 km / h).
. The climate control system judges that there are passengers occupying the rear seats according to the opening and closing of the rear doors. However, pressing“” button will turn off the function that judges whether the rear doors are open or closed. To turn the function on again, turn the ignition switch to the“ OFF” position for approximately one hour.
. The system may not be able to judge the presence of passengers accurately, in which case this function may not operate properly.
TEMPERATURE CONTROL s04aj02
Turn the temperature control dial to set the preferred interior temperature.
MAX A / C mode s04aj0208
For quicker cooling, press the MAX A / C button.
Press the MAX A / C button to turn on the MAX A / C mode. The MAX A / C indicator will illuminate on the climate control panel. Press the MAX A / C button again to turn off the MAX A / C mode and return to the previous setting. The MAX A / C indicator will not illuminate on the climate control panel. When the MAX A / C mode is off, the MAX A / C indicator will no longer be illuminated.
When the MAX A / C mode is on, the following settings will be changed automatically.
. The air conditioner will turn on.
. The temperature will be set on the lowest.
. The fan speed will be set on the maximum speed.
. The air inlet will be set to the recirculation mode.
. The airflow mode setting will be set to the ventilation mode.
NOTE
MAX A / C mode will be canceled if the Distraction Mitigation System completes user recognition again while MAX A / C mode is in use.
SYNC mode s04aj0207
When the SYNC mode is turned on, both the driver’ s and passenger’ s side temperatures are synchronized using the driver’ s side temperature control dial.
Press the SYNC button to turn on the SYNC mode. The SYNC indicator will illuminate on the climate control panel.
Press the SYNC button again or turn the passenger’ s side temperature control dial to cancel the SYNC mode. The SYNC
– CONTINUED –
4