INSTRUMENTS AND CONTROLS 247
the center information display. Refer to“ Vehicle” FP206.
. The factory setting( default setting) for this function is set as the front passenger’ s side mirror. The setting of driver’ s side mirror operation can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
CAUTION
Depress the brake pedal during the reverse tilt-down mirror angle adjustment.
To adjust the reverse tilt-down mirror angle, adjust the outside mirror using the remote control mirror switch while the reverse tilt-down operates. For details about how to adjust the outside mirror angle, refer to“ Remote control mirror switch” FP246.
Memory function:
The angle of the reverse tilt-down mirror can be registered. Register the position with button“ 1”,“ 2” or each of the access key fobs and retrieve the position.
For details about registration or retrieval of a position, refer to“ Driver’ s Seat Memory Function” FP41.
NOTE
If the seat is moved forward or backward 1.18 in( 30 mm) or more, the reverse tiltdown will move to the factory default position or the last position hold.
Hold last position function:
The angle of the reverse tilt-down mirror can be set to the latest adjusted angle.
The hold last position function operates when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward 1.18 in( 30 mm) or more.
NOTE
. The factory setting( default setting) for this function is set as“ non-operational”. This setting can be changed to“ operational” at SUBARU dealers. For more details, contact a SUBARU dealer.
. If the hold last position function setting is“ non-operation”, the reverse tiltdown will move to the factory default position.
Power folding mirror switch( if equipped) s03ap0304
S _ 308421-W
The power folding mirror switch operates when the ignition switch is in the“ ON” or“ ACC” position.
To fold the outside mirrors, press the power folding mirror switch. To unfold the mirrors, press the switch again.
NOTE
. If the outside mirrors have been operated( folded or unfolded) manually, when you turn the ignition switch from the“ OFF” position to the“ ACC” or“ ON” position, the outside mirrors may be adjusted automatically depending on the status of the power folding mirror switch.
. If the outside mirrors have been manually folded slightly forward of the regularly unfolded position, when you turn the ignition switch from the“ OFF” position to the“ ACC” or“ ON” position, the outside mirrors may automatically
3
– CONTINUED –