INSTRUMENTS AND CONTROLS 215
the headlights will turn on again.
Sensor for the auto on / off headlights
s03ah0101 lever rearward and releasing it will switch the headlights to low beam.
When the light control switch is in the“ AUTO” position, pushing the lever forward turns the High Beam Assist is on.
Refer to“ High Beam Assist Function” FP215.
When the headlights are on high beam, the high beam indicator light“” on the instrument cluster also illuminates.
3
HEADLIGHT FLASHER s03ah03
S _ 308370-W
The location of the sensor is shown in the illustration.
CAUTION
If any object is placed on or near the sensor, the sensor may not detect the level of the ambient light correctly and the auto on / off headlights may not operate properly.
HIGH / LOW BEAM CHANGE( Dimmer) s03ah02
S _ 307639-MW
CAUTION
Do not hold the lever in the flashing position for more than just a few seconds.
To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. The headlight flasher works even though the lighting switch is in the off position.
When the headlights are on high beam, the high beam indicator light“” on the instrument cluster also illuminates.
S _ 307638-MW
While the light control switch is in the“” or“ AUTO” position in a dark place, the headlights will turn on.
Pushing the lever forward and releasing it will activate the high beam. Pulling the
HIGH BEAM ASSIST FUNCTION s03ah07
The high beam assist function automatically changes the headlight from high beam to low beam( or vice versa).
– CONTINUED –