180
INSTRUMENTS AND CONTROLS
SECURITY INDICATOR LIGHT s03ae16
This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system.
Alarm system s03ae1601
It blinks to show the driver the operational status of the alarm system. For detailed information, refer to“ Alarm System” FP136.
Immobilizer system s03ae1602
The security indicator light starts blinking in the following conditions.
. Immediately after the push-button ignition switch is turned to the“ OFF” position.
. Immediately after the driver’ s door is opened or closed when all of the following conditions are met.
– The push-button ignition switch is in the“ ON” or“ ACC” position.
– The engine is not running.
In the event that an unauthorized key is used( for example, the key is unregistered or the ID code does not match), the power is not switched to“ ON” and the security indicator light continues blinking.
NOTE
. The security indicator light remains off in the following conditions. It means that the matching of the ID code is completed and the immobilizer system is deactivated, and it does not indicate a malfunction.
– While the engine is running – The push-button ignition switch
has been turned to the“ ON” or“ ACC” position and the driver’ s door has not been opened or closed
. Even if a malfunction occurs, such as the security indicator light flashes irregularly, it will not affect the functionality of the immobilizer system.
SELECT LEVER / GEAR POSI- TION INDICATOR s03ae43
S _ 308068-W
Upshift indicator Downshift indicator Select lever / gear position indicator
The select lever position is displayed on the indicator.
When the manual mode is selected, the gear position indicator, which shows the current gear selection, and the available up shift / downshift indicator light up. Refer to“ Selection of Manual Mode” FP325.
TURN SIGNAL INDI- CATOR LIGHTS s03ae20
These lights show the operation of the turn signal or lane change signal.
If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to“ Replacing Bulbs” FP504.