Seatbelts 51 |
||||||||
|
pull it out more slowly .
. If the belt still cannot be unlocked , let the belt retract slightly after giving it a strong pull , then pull it out slowly again .
|
! Adjusting the front seat shoulder belt anchor height s01ae060101 |
1 |
||||||
4 . Insert the tongue plate into the buckle until you hear a click . |
5 . To tighten the lap part , pull up on the shoulder belt .
6 . Place the lap belt as low as possible on the hips , not on the waist .
|
The shoulder belt anchor height should be adjusted to the position best suited for the driver / front passenger . Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck . |
Seat , Seatbelt and SRS Airbags |
|||||
|
To raise :
Push and hold the upper part of the anchor and slide the anchor up .
To lower :
Push and hold the upper part of the anchor and slide the anchor down .
|
||||||||
Pull down the anchor to make sure that it is locked in place . |
||||||||
– CONTINUED – |