528
Engine Oil
2.4 L turbo models 1 Oil level gauge 2 Oil filler cap 3 Oil filter
CAUTION
If the level gauge is not pulled out easily, twist the level gauge right and left, then pull it out. Otherwise, you may be injured accidentally straining yourself.
2. Pull out the level gauge, wipe it clean, and insert it again.
3. Be sure the level gauge is correctly inserted until it stops.
2.5 L non-turbo models 1 Full level 2 Low level
3 Approximately 1.1 US qt( 1.0 liter, 0.9 Imp qt) from low level to full level
2.4 L turbo models 1 Full level 2 Low level
3 Approximately 1.1 US qt( 1.0 liter, 0.9 Imp qt) from low level to full level
4. Pull out the oil level gauge again.
5. Check the oil level on both sides of the level gauge. The engine oil level must be judged by the lowest of the two levels. If the oil level is below the low level mark, add oil so that the full level is reached.
CAUTION
. Be careful not to touch the engine oil filter when removing the oil filler cap. Doing so may result in a burn, a pinched finger, or may