Subaru Outback Manuals 2025 Outback Owner's Manual | Page 225

Center Information Display( CID) 217
Items
Page for 11.6-inch display models
Page for dual 7.0- inch display models
Interruption screen
218
Vehicle status and maintenance information
219
251
Vehicle settings
226
245 / 248
Climate control operations
226
245
Front View Monitor( if equipped)/ Rear view camera
405 / 408
Navigation system
Refer to the navigation / audio Owner’ s Manual.
Audio / telephone
Refer to the navigation / audio Owner’ s Manual.
Refer to the Owner’ s
EyeSight
Manual supplement for the EyeSight system.
The center information display can also be used to set and initialize the center information display itself.
NOTE
. When the vehicle is in motion, certain functions and selections may not be available.
. The language and units for both the center information display and the
combination meter display( color LCD) can be changed. For details about language settings, refer to“ General settings” FP227( 11.6- inch display models) or“ General settings” FP245( dual 7.0-inch display models). For details about unit settings, refer to“ Car settings” FP232( 11.6-inch display models) or“ Car Settings icon” FP251( dual 7.0-inch display models).
. The images displayed in this Owner’ s Manual are sample images. The actual image may vary depending on the region and vehicle specifications.
& Welcome Screen s03bs02
Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed, the welcome screen will appear for a short time.
NOTE
. The welcome screen will disappear when the ignition switch is turned to the“ ON” position while the welcome screen is shown.
. The welcome screen can be turned on or off. For details, refer to“ General settings” FP227( 11.6-inch display models) or“ General settings” FP245( dual 7.0-inch display models).
. For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’ s door is opened and closed. This does not indicate a malfunction.
& Good-Bye Screen s03bs08
The good-bye screen will be displayed under the following conditions.
. The driver’ s door is opened after the ignition switch is put in the“ OFF” position.
. 3 minutes have passed after the ignition switch is put in the“ OFF” position with the driver’ s door closed.
. 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the“ OFF” position.
. The battery voltage is low when the ignition switch is put in the“ OFF” position.
3
Instruments and Controls
– CONTINUED –