Subaru Outback Manuals 2025 Outback Owner's Manual | Page 208

200
Warning and Indicator Lights
Inside warning chime
Outside warning chime
Operation indicator on push-button ignition switch
Ding——
Ding
Ding
Long beep( continuous)
Long beep( continuous)
Beep, beep, beep( 3 times)
Beep, beep, beep( 3 times)
Long beep( continuous)
——
Status
Access key warning for engine start: The push-button ignition switch is pressed while the access key fob is not inside the vehicle.
Access key takeout warning: The driver exits the vehicle with the access key fob and closes the driver’ s door while the push-button ignition switch is in a position other than“ OFF” and the select lever is in the“ P” position.
Passenger access key takeout warning: A fellow passenger exits the vehicle with the access key fob and closes a door other than the driver’ s door while the push-button ignition switch is in a position other than“ OFF”.
Access key takeout without“ P” position warning: The driver exits the vehicle with the access key fob and closes the driver’ s door while the push-button ignition switch is in a position other than“ OFF” and the select lever is in a position other than the“ P” position.
Select lever position warning:
. Case 1: The engine is turned off by pressing the push-button ignition switch while the select lever is in a position other than the“ P” position.
. Case 2: The driver’ s door is opened while the push-button ignition switch is in a position other than“ OFF” and the select lever is in a position other than the“ P” position.
Action
Carry the access key fob, and press the push-button ignition switch.
Switch the push-button ignition switch to“ OFF”, and get out of the vehicle.
Return the access key fob to inside the vehicle, or switch the push-button ignition switch to“ OFF”.
Shift the select lever to the“ P” position, switch the push-button ignition switch to“ OFF” and exit the vehicle.
. Case 1: Start the engine, shift the select lever to the“ P” position, switch the pushbutton ignition switch to“ OFF” and exit the vehicle.
. Case 2: Shift the select lever to the“ P” position, switch the push-button ignition switch to“ OFF” and exit the vehicle.