160
Rear Gate( Outback / Subaru Outback Wilderness)
be locked by using the keyless access function or the remote keyless entry system. Unlock the doors using the keyless access function or the remote keyless entry system before pressing the power rear gate button again.
. The factory setting( default setting) of the operation for the“” button on the access key fob or the transmitter is pressing and holding. This setting can be changed to nonoperation or pressing twice at SUBARU dealers. For more details, contact a SUBARU dealer.
To pause the opening rear gate:
Briefly press the power rear gate button while the rear gate is being opened. Then an electronic chirp will sound twice and the hazard warning flashers will flash twice.
If you press the power rear gate button again, the rear gate will close.
You can open the rear gate by pressing the power rear gate button briefly while the rear gate is being closed.
NOTE
The rear gate cannot be paused when it is in the approximately 2 in( 5 cm) range from the fully closed position. The system will ignore any button operation and the rear gate will continue to open.
To close the rear gate:
Press and hold the power rear gate button. Then an electronic chirp will sound twice and the hazard warning flashers will flash twice. If you briefly press the power rear gate button again, the rear gate will open.
! By the buttons on the rear gate s02aj011102
NOTE
After performing the following procedures, an electronic chirp will sound twice and the hazard warning flashers will flash twice.
Rear gate opener button