Door Locks 145 |
||||||
|
& Key Lock-In Prevention Function s02ac06
Under the following conditions, all the doors will not lock when the power door locking switch is pushed with a front door open.
. The key is still in the ignition switch( models without“ keyless access with push-button start system”).
. The ignition switch is in the“ ACC” or“ ON” position( models with“ keyless access with push-button start system”).
NOTE
. When leaving the vehicle, make sure you are holding the key before locking the doors.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
. The factory setting( default setting) for this function is set as“ operational”. This function’ s operational /
|
non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.
! Non-operation of key lock-in prevention function s02ac0602
When the system is set so that it does not operate, the doors are locked by the following operation.
. If the lock lever is turned to the front(“ LOCK”) position with the driver’ s door open and the driver’ s door is then closed with the lock lever in that position, the driver’ s door is locked.
. If the spare key is used to lock the driver’ s door from the outside of the vehicle, the door is locked.
& Battery Drainage Reduction Function s02ac03
Under various conditions, lights inside the vehicle will automatically turn off to reduce the risk of discharging the battery.
! Battery drainage reduction function for various conditions s02ac0302
This function will enter standby mode under the following conditions:
. The ignition switch is turned to the“ OFF” position( models with“ keyless access with push-button start system”).
. The key is removed from the ignition
|
key cylinder( models without“ keyless access with push-button start system”).
If the following actions are not performed within 20 minutes, while the function is in standby mode, any room lights that are on will automatically turn off.
Turning off lights
Actions
– Map light – Dome light – Ignition switch light * 2 – Cargo area light * 3 – Trunk light * 4 – Rear gate light * 5 – Door courtesy light * 5 – Vanity mirror light
– Turn the ignition switch to the“ ACC” or“ ON” position.
– Open or close the doors, including the rear gate.* 3
– Open or close the doors, including the trunk.* 4
– Push the unlock button on the access key fob or transmitter.
– Hold the front door handle and unlock it while holding the access key fob.* 1
– Insert the key into the keyhole of the ignition switch.* 2
– Come close to the vehicle that the front door was locked while holding the access key fob( if OFF delay timer setting for period of time is not off).* 1 – Push the panic button on the access key fob or transmitter.
* 1: Models with“ keyless access with pushbutton start system”
* 2: Models without“ keyless access with push-
|
2
Keys and Doors
|
|||
– CONTINUED – |