! Registration for a PIN code | ||||
s02ap2102 | ||||
Steps |
Operation |
Time from the previous step |
||
1 |
Turn off the ignition switch. |
— |
||
2 |
Close all doors( including trunk / rear gate). |
— |
||
3 |
Press and hold the“
” button on the access key fob, then press and hold the trunk opener button( Legacy)/ rear lock button( Outback / Subaru Outback Wilderness) until a chirp sounds intermittently.
|
— |
||
4 |
Press the“ |
” button on the access key fob. |
Within 30 seconds |
|
Input the PIN code using the trunk opener button( Legacy)/ rear lock button( Outback / Subaru Outback Wilderness) within 30 seconds after the chirp sound of step 4. For example, to register“ 32468” as the PIN code, perform the following procedure. |
||||
5 |
( 1)
( 2)
|
Press the button three times.
After a chirp sounds once, press the button twice.
|
Within 30 seconds |
|
( 3) |
After a chirp sounds once, press the button four times. |
|||
( 4) |
After a chirp sounds once, press the button six times. |
|||
( 5) |
After a chirp sounds once, press the button eight times. |
|||
6 |
Perform step 5 again within approximately 30 seconds after the chirp starts sounding intermittently. |
— |
||
7 |
All doors will be unlocked and locked. Then the PIN code will be registered. |
— |
||