4 . Check that “ Connected ” is displayed next to the Bluetooth phone / device when the connection is complete .
NOTE
� If an error message appears , follow the guidance on the screen to try again .
� It may take time if the Bluetooth phone / device connection is carried out during Bluetooth audio playback .
� Depending on the type of Bluetooth phone / device being connected , it may be necessary to perform additional steps on the Bluetooth phone / device .
AUTO CONNECTION MODE
Leave the Bluetooth phone / device in a location where the connection can be established .
� When the ignition switch is turned to the “ ACC ” or “ ON ” position , the system searches for a nearby registered Bluetooth phone / device .
� If a nearby registered Bluetooth phone / device is registered to favorite , the device will be connected automatically . ( �P . 87 ) If there are no devices registered to favorite , the system will connect with the registered Bluetooth phone / device that was last connected , if it is nearby .
CONNECTING MAN
When the auto connec Bluetooth phones / dev
Follow the “ CONNEC PHONE / DEVICE ”. ( �P . 8
RECONNECTING TH
If a Bluetooth phon reception from the Blu is turned to the “ ACC ” o reconnects the Bluetoo
� If a Bluetooth p such as turning the Bluetooth p
NOTE
� When a Bluetooth ph driver , a message may the driver is desired . ( �