Adaptive Cruise Control
How to use Adaptive Cruise Control
■ Setting Adaptive Cruise Control
1 . Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ), your vehicle indicator and the following distance setting indicator are displayed on the combination meter display . The set vehicle speed display will read “ - - - MPH ( - - - km / h )”.
( 1 )
( 2 )
H00530
H01600
( 1 ) Following distance setting indicator ( 2 ) Adaptive Cruise Control indicator
( white )
To set the ready status : When all of the following conditions are met , ( READY indicator ) is displayed on the combination meter display , and Adaptive Cruise Control can be activated . - All doors ( except the rear gate / trunk ) are closed . - The driver ’ s seatbelt is fastened . - The electronic parking brake is not applied . The electronic parking brake indicator light is off .
- The select lever is in the “ D ” or “ M ” position .
( 1 )
( 1 ) READY indicator
H01601
74