Conventional Cruise Control
NOTE
• When the main cruise control is off and the ( CRUISE ) switch is pressed , Adaptive Cruise Control is activated .
• When the main cruise control is on , switching between Adaptive Cruise Control and Conventional Cruise Control is possible by pressing the / ( Following distance setting ) switch *. *: To switch to Conventional Cruise Control , press and hold the switch for approximately 2 seconds or longer .
• Conventional Cruise Control can be used even when EyeSight is temporarily stopped .
How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
1 . Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ), your vehicle indicator and the following distance setting indicator are displayed on the combination meter display . The set vehicle speed display will read “ - - - MPH ( - - - km / h )”. When the ( CRUISE ) switch is pressed , the initial cruise control mode is always Adaptive Cruise Control .
( 1 )
( 2 )
H00541
H01602
( 1 ) Following distance setting indicator ( 2 ) Adaptive Cruise Control indicator
( white )
143