|
it counterclockwise .
6 . Pull the bulb out of the bulb holder and replace it with a new one .
7 . Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks .
|
the clips , refer to “ Type C clips ” FP522 . |
|||||
8 . Reinstall the rear combination light assembly by sliding the two-pronged part of the combination light assembly securely to each holder of the vehicle side . |
9 . Tighten the upper and lower screws . 10 . Reinstall the side cover .
! Outback / Subaru Outback Wilderness
s11be0502
|
2 . Remove the side cover . |
Maintenance and Service
11
|
|||
3 . Remove the upper and lower screws . |
||||||
1 . Undo the clips . For the method to undo |
||||||
– CONTINUED – |