422
Reverse Automatic Braking ( RAB ) System
CAUTION
To ensure correct operation of the BSD / RCTA , observe the following precautions .
. Always keep the bumper surface near the rear corner radars clean .
. Do not affix any stickers or other items on the bumper surface near the rear corner radars . For details , consult your SUBARU dealer .
. Do not modify the bumper near the rear corner radars .
. Do not paint the bumper near the rear corner radars .
. Do not expose the bumper near the rear corner radars to strong impacts . If a sensor becomes misaligned , a system malfunction may occur , including the inability to detect vehicles entering the detection areas . If any strong shock is applied to the bumper , be sure to contact your SUBARU dealer for inspection .
. Do not disassemble the rear corner radars .
NOTE
If the rear corner radars require repair or replacement , or the bumper area around the rear corner radars requires repair , paintwork or replacement , contact your SUBARU dealer for assistance .
7-21 . Reverse Automatic Braking ( RAB ) System ( If Equipped ) s07bn
Reverse Automatic Braking ( RAB ) is a system designed to help avoid collisions or reduce collision damage when reversing the vehicle . If a wall or an obstacle is detected in the reversing direction , the system will notify the driver with a warning sound and may activate the vehicle ’ s brakes automatically .
WARNING
. Reverse Automatic Braking ( RAB ) is not a system intended to replace the driver ’ s responsibility to check their surroundings for vehicles or obstacles to avoid a collision .
. The driver is responsible for driving safely . Before reversing , be sure to first depress the brake pedal and visually check the surroundings .
. There are some cases in which the vehicle cannot avoid collision , because the system operation has limitations . The warning sound or automatic braking may