Mirrors 301 |
|||||||
|
. The factory setting ( default setting ) for this function is set as the front passenger ’ s side mirror . The setting of driver ’ s side mirror operation can be changed by a SUBARU dealer . Contact your SUBARU dealer for details .
CAUTION
Depress the brake pedal during the reverse tilt-down mirror angle adjustment .
To adjust the reverse tilt-down mirror angle , adjust the outside mirror using the remote control mirror switch while the reverse tilt-down operates . For details about how to adjust the outside mirror angle , refer to “ Remote control mirror switch ” FP300 .
Memory function :
The angle of the reverse tilt-down mirror can be registered . Register the position with button “ 1 ”, “ 2 ” or each of the access key fobs and retrieve the position .
For details about registration or retrieval of a position , refer to “ Power driver ’ s seat with synchronized outside mirrors memory function ” FP34 .
|
NOTE
If the seat is moved forward or backward 1.18 in ( 30 mm ) or more , the reverse tilt-down will move to the factory default position or the last position hold .
Hold last position function :
The angle of the reverse tilt-down mirror can be set to the latest adjusted angle .
The hold last position function operates when the following condition are met .
. The memory function is not used .
. The seat is moved forward or backward 1.18 in ( 30 mm ) or more .
NOTE
. The factory setting ( default setting ) for this function is set as “ nonoperational ”. This setting can be changed to “ operational ” at SUBARU dealers . For more details , contact a SUBARU dealer .
. If the hold last position function setting is “ non-operation ”, the reverse tilt-down will move to the factory default position .
|
! Power folding mirror switch ( if equipped ) s03ap0304 |
The power folding mirror switch operates when the ignition switch is in the “ ON ” or “ ACC ” position .
To fold the outside mirrors , press the power folding mirror switch . To unfold the mirrors , press the switch again .
NOTE
. If the outside mirrors have been operated ( folded or unfolded ) manually , when you turn the ignition switch from the “ LOCK ”/“ OFF ” position to the “ ACC ” or “ ON ” position , the outside mirrors may be adjusted automatically depending on the status of the power folding mirror switch .
|
3
Instruments and Controls
|
|||
– CONTINUED – |