. Do not use front seats with their backward-forward position and seatback not being locked into place securely . If any of them are not locked securely , adjust them again . For adjusting procedure , refer to “ Front Seats ” FP28 . |
tact your SUBARU dealer for an inspection .
! Rear passenger ’ s seats
s03ae0115
|
|||||||
|
If the seatbelt warning system for the front passenger ’ s seat does not function correctly ( e . g ., it is activated even when the front passenger ’ s seat is empty or it is deactivated even when the front passenger has not fastened his / her seatbelt ), take the following actions .
. Ensure that no article is placed on the seat other than a child restraint system and its child occupant , although we strongly recommend that all children sit in the rear seat properly restrained .
. Ensure that there is no article left in the seatback pocket .
. Ensure that the backward-forward position and seatback of front passenger ’ s seat are locked into place securely by moving the seat back and forth .
|
Rear seatbelt warning light ( dual 7.0-inch display models )
1 Rear left seat 2 Rear center seat 3 Rear right seat
|
Rear seatbelt warning light ( 11.6-inch display models )
1 Rear left seat 2 Rear center seat 3 Rear right seat
With the ignition switch turned to the “ ON ” position , the seatbelt warning light and chime reminds the rear passenger to fasten their seatbelt by illuminating the warning lights in the locations indicated in the above illustration and sounding a chime .
WARNING
|
3
Instruments and Controls
|
|||||
If still the seatbelt warning system for front passenger ’ s seat does not function correctly after taking relevant corrective actions described above , immediately con- |
. The driver must check that the all passengers have fastened their seatbelts properly since the seatbelt warning system may not detect passengers under the fol- |
|||||||
– CONTINUED – |