� Selecting besides the name of the desired Bluetooth phone / device changes the icon to ( yellow ). The selected device will be moved to the top of the list .
� If the desired Bluetooth phone / device is not on the list , select ( Add ) to register the Bluetooth phone / device . ( �P . 84 )
4 . Check that “ Connected ” is displayed next to the Bluetooth phone / device when the connection is complete .
� If an error message appears , follow the guidance on the screen to try again .
NOTE
� It may take time if the Bluetooth phone / device connection is carried out during Bluetooth audio playback .
� Depending on the type of Bluetooth phone / device being connected , it may be necessary to perform additional steps on the Bluetooth phone / device .
AUTO CONNECTION MODE
Leave the Bluetooth phone / device in a location where the connection can be established .
� When the ignition switch is turned to the “ ACC ” or “ ON ” position , the system searches for a nearby registered Bluetooth phone / device .
� If a nearby registered Bluetooth phone / device is registered to favorite , the device will be connected automatically . ( �P . 87 ) If there are no devices registered to favorite , the system will connect with the registered Bluetooth phone / device that was last connected , if it is nearby .
CONNECTING MANUALLY
Bluetooth ® SETTINGS
When the auto connection has failed , it is necessary to connect Bluetooth phones / devices manually .
Follow the “ CONNECTING OR DISCONNECTING Bluetooth PHONE / DEVICE ”. ( �P . 87 )
Settings
3
89