Lane Departure Prevention Function
■ Canceling Lane Departure Prevention Function
●Canceling by driver operation Any of the following operations temporarily cancels Lane Departure Prevention Function . While temporarily canceling this function , the lane indicator turns to gray .
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane change .
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system Under the following conditions , a notification will sound 1 short beep and 1 long beep and Lane Departure Prevention Function is temporarily canceled . While the function is temporarily canceled , the lane indicator turns to gray . Also , the Lane Departure Prevention Function cancellation message is displayed on the combination meter display .
• The system does not detect the lane markings .
• The windshield wiper operates at a high speed .
• The vehicle speed is less than approximately 34 mph ( 55 km / h ) or is more than
S03528 approximately 100 mph ( 160 km / h ).
• The Vehicle Dynamics Control or the Traction Control Function is activated .
• Either the driver ’ s door , the front passenger ’ s door or the rear door is open .
• The driver ’ s seatbelt is unfastened .
• The electronic parking brake is applied .
• The select lever is moved to a position other than “ D ” or “ M ”. - Lane Departure Prevention Function can be resumed after the select lever is returned to the “ D ” or “ M ” position .
91