Advanced Adaptive Cruise Control
WARNING
• When the stay-stopped function is canceled by pressing the ( CRUISE ) switch , the vehicle will start to creep . Depress the brake pedal as necessary .
• Do not exit the vehicle while the stay-stopped function is engaged .
• The stay-stopped function is not a replacement for engaging the electronic parking brake . When parking , always apply brakes manually to come to a full stop , then set the electronic parking brake .
CAUTION
The stay-stopped function of cruise control will be canceled under the following conditions :
• The vehicle is in stay-stopped mode for approximately 2 minutes or more . A notification will sound 5 intermittent beeps , 1 short beep and 1 long beep .
• Any condition in which automatic cancellation is met . A notification sounds 1 short beep and 1 long beep .
� Page 65 After the stay-stopped function has been canceled , the electronic parking brake will be automatically applied and the electronic parking brake indicator light will illuminate . However , if any canceling condition for the electronic parking brake ( i . e . the interlock system with the accelerator pedal , switch operation of the electronic parking brake , etc .) is fulfilled , the electronic parking brake will not work . For details , refer to the Owner ’ s Manual for your vehicle . If the accelerator pedal is only slightly depressed while the stay-stopped function is activated , the stay-stopped function of cruise control may be canceled , and the electronic parking brake may not work .
�Setting Adaptive Cruise Control while the electronic parking brake is applied If the electronic parking brake is applied before setting Adaptive Cruise Control , release the electronic parking brake by depressing the accelerator pedal or by other specified means . For details of how to release the electronic parking brake , refer to the Owner ’ s Manual for your vehicle .
63