Advanced Adaptive Cruise Control
CAUTION
• When Adaptive Cruise Control is operating , the actual vehicle speed is controlled according to the lead vehicle . Therefore , if the RES / SET switch is pressed to the “ RES /+” side and set to a speed higher than the speed of the lead vehicle , the vehicle will not accelerate ; it will maintain a safe following distance as the first priority . However , because doing so changed the set vehicle speed , when the lead vehicle is no longer detected ( for example , if you change to a freeway lane with no vehicles in front ), the vehicle will accelerate to that new set vehicle speed . Change the set vehicle speed while briefly checking the value shown in the set vehicle speed display on the EyeSight display area .
• When the accelerator pedal is depressed with Adaptive Cruise Control on , automatic braking control and warnings by Adaptive Cruise Control will not occur . However , if there is a high risk of collision with an obstacle in front of the vehicle at this time , the warning and braking control of Pre-Collision Braking System may activate .
●Decreasing the set vehicle speed
�Using the RES / SET switch
• Push to the “ SET / - ” side briefly . Every time the switch is pushed , the set vehicle speed will decrease to the next 5 mph ( 5 km / h ) decrement .
• Push to the “ SET / - ” side continuously . While the switch is being pushed , the set vehicle speed will decrease in decrements of 1 mph ( 1 km / h ).
When operating the switch , the set vehicle speed changes on the combination meter display .
S03396
�Using the brake pedal
1 . Depress the brake pedal to decrease the vehicle speed . Adaptive Cruise Control will be canceled and ( Adaptive Cruise Control indicator ) changes from green to white .
2 . When the desired speed is reached , press the RES / SET switch to the “ SET / -” side . The speed at the time of pressing the switch will be set as the new set vehicle speed , and it appears on the EyeSight display area .
57