Subaru Outback Manuals 2022 Outback EyeSight Driving Assist System Manual | Page 53

Advanced Adaptive Cruise Control
■ How to use Adaptive Cruise Control
●Setting Adaptive Cruise Control
( 1 ) Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ), your vehicle indicator and the following distance setting indicator are displayed on the EyeSight display area of the combination meter display . The set vehicle speed display will read “ - - MPH ( - - - km / h )”.
Following distance setting indicator
Adaptive Cruise Control indicator ( white )
S03393 S03414
To set the ready status :
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
( READY indicator ) is displayed
on the EyeSight display area .
-
All doors ( except the rear gate / trunk )
are closed .
-
-
The driver ’ s seatbelt is fastened .
The electronic parking brake is not
READY indicator
engaged . The electronic parking brake
indicator light is turned off .
S03415
-
The select lever is in the “ D ” or “ M ” position .
-
The brake pedal is not depressed while driving or the brake pedal is strongly
depressed while stopping .
-
EyeSight operation is not temporarily stopped .
( EyeSight temporary stop indicator
: White ) is turned off .
� Page 125
51