Advanced Adaptive Cruise Control
• The stereo camera may have difficulty detecting the following objects or conditions . Operate the brake pedal and take other actions as necessary . - Vehicles at significantly different speeds ( vehicles driving slowly , stopped or oncoming vehicles , etc .) - Vehicles cutting into your lane - Motorcycles , bicycles , pedestrians and animals , etc . - Light is poor in the evening or early morning . - At night or in a tunnel without the headlights on - At night or in a tunnel when there is a vehicle in front that does not have its taillights on - Strong light is coming from the front ( sunlight or headlight high beams , etc .). - Vehicles in front that have a rear aspect that is low , small or irregular ( the system may recognize another part of the vehicle and will determine operation from that )
• An empty truck or trailer that has no tailgate or longbed
• Vehicles that have cargo protruding from their back ends
S02133
• Non-standard shaped vehicles ( vehicle transporters or vehicles with a sidecar fitted , etc .)
• Vehicles that are low - Objects that are located close to the bumper of your vehicle
• When you do not want to use Adaptive Cruise Control , be sure to turn the
( CRUISE ) switch off . If the switch is left on , cruise control may be accidentally engaged , possibly resulting in an accident .
• Before using Adaptive Cruise Control , be sure to fully verify the safety of the vehicle occupants and the area around the vehicle . Never operate the cruise control from outside the vehicle .
Detection of the vehicle in front by the EyeSight stereo camera *
• Under the following road conditions or conditions of your vehicle , detection of the vehicle in front may not be possible . Vehicles in neighboring traffic lanes or roadside objects may also be incorrectly detected . Under conditions such as these , do not use Adaptive Cruise Control . If cruise control is currently in use , operate the brake pedal and take other actions as necessary .
Continued on next page �
47